Mair Artboard

Frequently Asked Questions

Open all Close all
  • How do I order a Mair Surfboard?

    The first step is to contact us via email with information on what it is you are looking for in your new board. Robin will then get back to you and start up a conversation about your needs.

    It helps to have looked through some of the designs on this site to see if there is anything that aligns with what you are looking for, this will help us start the discussion from a meaningful common point.

    If your needs require a brand new design that will surface in this discussion.

    We do require a deposit up front before we start working on the order!

  • Do you ship surfboards to the mainland?

    Most of our boards are shipped off island so we can definitely ship a board to the mainland. The shipping rates are very unpredictable and based on the size of the board. We have spent a considerable amount of effort researching the most reasonable and effective means of safely shipping surfboards.

  • Do you ship surfboards to other countries outside the USA?

    Because of the prohibitive shipping costs for a surfboard, we cannot ship to countries outside the US! For anyone that is interested we can certainly investigate shipping to other countries but it is not something we have done.

    However, if you are in Australia we are setting up a shaping room in New South Wales and would be happy to build a board for you. Please feel free to email us if this is of interest.

  • What about buying fins?

    We already ship fins all over the world and currently are manufacturing them in both Hawaii and Australia.

    If you are interested in our fins please check out the selection shown on this site, or our sister site GEARBOX Surf. Once you find something you are interested in contact us and we can get the ball rolling to get them too you. Some of our molded fins are available for purchase directly from the GEARBOX website.

    Currently, we only make fins for either GEARBOX or DUAL TAB! We can also do glass-on fins and center fins. We have an extensive range of RTM molded fins called HRD-KORE that are featured on this site, but there are a lot more shown on the GEARBOX site so be sure to check it out.

  • Do you do your own laminating?

    We do a small amount of laminating ourselves, primarily only epoxy.

    We have a fantastic laminator that we have worked with for many years that does the bulk of our laminating work for us. The laminating shop is Imua Fiberglass and the laminator is Dave Implom. Dave is a very experienced craftsman and due to our longstanding working relationship he has a thorough understanding of our requirements and quality.

  • Do you use epoxy or polyester to laminate your surfboards?

    The reality is we can do either of these resin types.

    Many of our boards use a hybrid system were the primary laminating is done with polyester, but then we use epoxy to apply our V-Lam bamboo veneers.

    The lead time on epoxy boards is much longer than the polyester boards, so plan accordingly. Of course, the epoxy boards are also more expensive than polyester due to the increased resin costs and the increased charges for laminating with epoxy.

  • What blanks do you use?

    Arctic Foam is our primary blank supplier, we have had a long relationship with them and exclusively use their foam. Blanks available directly on the island or we get them from Oahu, so we have a wide choice of blanks. We also order custom blanks from the mainland that meet our rocker needs, or for triple stringers or custom T-band stringers.

    For EPS boards we use custom cut blanks made on island, or Marko Foam.

    For EPS boards we use custom cut blanks made on island, or Marko Foam.

  • Does the price of a surfboard include the fins?

    Fins are not included in the price of our surfboards. We will be happy to provide a quote for the fins when enquiring about the pricing for a surfboard.

    We do offer a discount on a set of fins when buying a surfboard!


Need Help?

Get in touch if you have any questions about of our surfboards.


©2013 - 2018 Mair Designs LLC. All Rights Reserved. Contact Us
Privacy Policy